Choose the C5106 PRO Accessory You Need

How the C5106 PRO Accessories Work Together

• Cut + Reconnect: use the Wire Connector Set at approved cut/reconnection points.
• Cross a Gap: use the Extension Cord where you do not want illuminated lights.
• Add Lighted Length: use the Extension Light while keeping the connected light-string length within the supported C5106 system limit.
• Create a Parallel Branch: use the SH13.5B Y Splitter (industry-standard X Connector, 3-pin) / Splitter Connection. Both outputs carry the same control signal.
• Replace Electronics: Power Supply and Control Box options are available for service or replacement.

Quick Accessory Selection

• For C5106 PRO, choose matching replacement lights, controllers and installation track. Select cables and splitters by compatible connector, signal and electrical ratings.
• Match White / Black where the accessory has a color option.
• For a Control Box, choose the Old or Upgraded version that matches your existing C5106 controller.
• C5106 PRO supports cutting and extending, but use the compatible connector method and restore waterproof protection at every reconnection point.
• The connected C5106 light-string length should remain within the supported system limit.

Need Track or a Complete C5106 PRO System?

If you are starting a new installation and want the matching track, select a Complete Kit (With Track) on the main C5106 PRO product page.

View C5106 PRO APPECK Permanent Outdoor Lights →

Read the C5106 PRO Installation & Troubleshooting Guide →

Designed Exclusively for APPECK PL2 RGBCW Permanent Outdoor Lights.

Power your APPECK PL2 lighting system with the 29V 96W Power Injection Kit. Whether you need to replace an existing power adapter or add an extra power supply to expand your lighting setup, this kit provides a flexible power solution for your installation.

What You Get

• DC29V 96W Power Adapter × 1

• Power Injection T-Connector × 1

• Extension Cable × 1

Flexible Power Solutions

Replace an Existing Power Supply
Use the kit as a replacement for a compatible PL2 power adapter when your original power supply needs to be replaced.

Add Power for Extended Installations
Add an extra power supply to support a larger PL2 lighting layout and extend your outdoor lighting coverage.

Expand Your Lighting Coverage

• Up to 144 LEDs per Power Supply: Each power supply can support up to 144 lights.

• Up to 4 Power Supplies: The PL2 system supports up to four power supplies.

• Up to 800 ft of Lighting: Expand your installation to cover up to 800 ft with a maximum of 576 LEDs.

Key Features

Reliable Power Support
Provides additional power support for compatible PL2 lighting installations.

Flexible Installation
The included Power Injection T-Connector and extension cable help accommodate power-injection layouts.

PL2 Compatibility
Designed specifically for the APPECK PL2 RGBCW Permanent Outdoor Lights system.

Important Notes

• Designed exclusively for APPECK PL2.

• Maximum system capacity: 4 power supplies, 576 LEDs, and up to 800 ft.

• Each power supply supports up to 144 LEDs.

• Follow the PL2 installation instructions when connecting the power injection kit.

• Ensure all connections are properly sealed with waterproof caps before use.

Compatible with APPECK 5106, 5111, and 5113-C Permanent Outdoor Lights.

Extend your APPECK permanent outdoor lighting setup with the APPECK 36V Power Injection Kit. Designed for compatible APPECK models, this kit provides an additional power connection to support extended lighting installations.

What You Get

• DC36V 144W Power Supply × 1

• T-Connector × 1

• 0.5 ft Positive Disconnect Power Cable × 1

• 4.92 ft Extension Cable × 1

Installation Instructions

For extending your compatible outdoor lighting setup:

1. Connect the last light string in the existing run to the positive disconnect power cable included in the kit.

2. Connect the additional light strings, T-connector, and power supply according to your installation setup.

3. Make sure all connections are fully sealed with the waterproof caps to prevent water intrusion.

Important Notes

• The total number of LEDs in the entire lighting run must not exceed 144.

• Designed for APPECK 5106, 5111, and 5113-C models only.

• Ensure all waterproof connections are properly sealed before use.

Designed exclusively for Appeck Permanent Outdoor Lights Pro (Model C5106), this track kit not only protects your lights but also enhances your home’s visual appeal with a sleek, architectural finish.

All-Weather Protection & Extended Lifespan：Built to last, the track kit provides reliable shielding from rain, snow, dust, sunlight, and minor impacts. It effectively guards your permanent light strings and wiring against the elements, ensuring stable performance and a longer service life for your outdoor lighting system.

Sleek & Seamless Decorative Upgrade：Say goodbye to messy hanging wires. The track mount design fits perfectly along eaves, walls, and courtyard edges, blending effortlessly with your home’s exterior. The result is a polished, modern look that highlights your architecture while showcasing your lighting at its best.

Durable, Flexible & Easy to Install：Crafted from high-strength, weather-resistant aluminum, the track kit stands up to heavy rain, intense sunlight, and extreme temperatures,making it simple to achieve a custom fit for any space. Enjoy a fast, secure, and hassle-free installation that looks great and lasts for years.

Tailor-Made for Appeck Outdoor Light Pro：This track kit includes 13 pieces, each approximately 50 inches long, perfectly sized and shaped for Appeck C5106 Permanent Outdoor Lights. Experience effortless compatibility and a professional-grade finish for your lighting project.

What You Get: Track section 3.84ft/1.17m x 13pcs, 40pcs screws pack x 2 bag, back panel x 26pcs

Track Kit Details

• Use with: APPECK Permanent Outdoor Lights Pro, C5106 Series.
• Track length: Approximately 50 ft total.
• Included: 13 track sections, screw packs and back panels.
• Not included: Lights, controller or power adapter.
• Available colors: White and Black.

Who Is This Track Kit For?

This kit is designed for existing APPECK Pro C5106 owners who want a cleaner, more finished roofline installation, or for customers adding matching track to a C5106 lighting project.

Frequently Asked Questions

Does this 50 ft track kit include permanent lights?

No. This listing is for the track and mounting hardware only. Permanent lights are sold separately.

Which APPECK lights are compatible with this track kit?

This track kit is designed for the updated APPECK C5106 PRO double-lens version with the center groove used by the track system. It is not intended for other APPECK models or third-party lights. If you own an older C5106 version, confirm the housing before ordering.

How much track is included?

One kit includes 13 track sections, each approximately 3.84 ft / 1.17 m long, for about 50 ft total. Use 2 kits for 100 ft, 3 kits for 150 ft and 4 kits for 200 ft.

Can I buy the lights and track together?

Yes. The APPECK Permanent Outdoor Lights Pro page offers Complete Kit (With Track) options for customers who want the lighting system and matching track together.

• Protecting String Lights and Wiring – This permanent outdoor lights track kit effectively shields against rain, snow, dust, sunlight, and minor impacts, safeguarding outdoor permanent light strings and wiring from environmental damage and extending the lifespan of your outdoor lighting.
• Enhancing Decorative Appeal – The track mount is ideal for installation on linear and irregular structures like eaves, walls, and courtyards. It eliminates the looseness and clutter of hanging setups, blends seamlessly with your home’s architecture, and creates a clean, polished outdoor lighting display.
• Flexible, Easy Installation – Made from PC (polycarbonate), this track is designed for outdoor mounting and supports DIY cutting for a custom fit. Follow the installation instructions and keep connections accessible where practical. It supports DIY cutting for a custom fit, with quick, hassle-free installation that’s both safe and reliable.
• Designed for APPECK C5111 and PL2 (C5121) – This 50 ft track kit is available in White or Black and is designed for the APPECK C5111 and PL2/C5121 Permanent Outdoor Lights families.

Keep your APPECK permanent outdoor lighting system running with the correct model-specific replacement controller. Choose the housing color and exact lighting model in the options above.

Choose the Correct Controller

• PL2 (C5121): Select PL2 for the 29V RGBCW lighting system.
• C5111: Select C5111 for the C5111 lighting system.
• C5113: Select C5113 for the C5113 lighting system.
• C5106 PRO: Select C5106 or C5106 Old Version to match the controller already installed in your system.

Important Compatibility Notes

Controllers are series-specific and are not interchangeable. PL2 uses a 29V system; do not select a C5106 or C5111 controller for PL2. If you are unsure which controller version you have, contact APPECK Support before ordering.

For a new or replacement PL2 setup, see the APPECK PL2 RGBCW lighting system and PL2 Accessories & Replacement Parts.

Warranty Support: For assistance with this accessory, contact APPECK Support with your order number and product model.

Extension cables for compatible APPECK permanent outdoor lighting systems.

Get more flexibility with APPECK Extension Cables. Designed to connect light sections across gaps, these cables make it easier to route your permanent outdoor lights around rooflines, corners, and other exterior features.

Whether you need to bridge a gap between two sections or adjust your lighting layout to fit your home's exterior, choose the cable length that works best for your installation.

Available Lengths:

• 1.6 ft (0.5m)

• 4.9 ft (1.5m)

• 9.8 ft (3m)

Package Includes: 2 extension cables per selected length.

Note: Before ordering, confirm your light model, controller generation, connector pinout and permitted cable length. A matching connector shape alone does not establish compatibility.

Choose the C5111 Accessory You Need

For Expansion or Custom Layouts

C5111 supports cutting and custom-length installation. For long C5111 200ft, 300ft or 400ft systems, continue to follow the supported parallel branch / SH13.5B Y Splitter architecture and the controller’s circuit limits.

• Need a non-lighted gap? Choose an extension cable compatible with your C5111 system.
• Need replacement or additional lights? Choose the matching White or Black Lights option and stay within the supported system configuration.
• Need a track-based installation? Track Kit configurations are available from the main C5111 product page.

Quick Accessory Selection

• Confirm your system is C5111.
• Match White / Black where the accessory has a color option.
• Connections and splitters: Select matching connector and signal options for your C5111 layout. The SH13.5B Y splitter sends the same signal to both outputs, while TS2 is designed for supported APPECK Life lighting systems. Choose 36V power accessories with suitable capacity and compatible connectors.
• Replacement parts: Choose C5111 light sections and the corresponding C5111 controller for this series. C5111 and PL2 share a track profile, while controllers and power voltage remain model-specific.
• For longer systems, keep the required SH13.5B Y Splitter / parallel branch layout.
• In the App, “Actual Point 144” refers to the maximum lights supported by one circuit, not the total system light count.

Need the Complete C5111 System?

If you are starting a new installation, choose the full C5111 kit in 200 ft, 300 ft or 400 ft. Track Kit variants are also available there.

View C5111 APPECK RGBW Permanent Outdoor Lights 2 →

Read the Length & Layout Guide →

Designed for APPECK C6612 outdoor spot lights. Choose the C6612-compatible accessory that fits your setup.

APPECK Extension Light Strings (5106 / 5111 / PL2)

Replacement & Extension Light Strings for APPECK Permanent Outdoor Lights

Choose the correct replacement light string for your existing APPECK lighting system. These are illuminated light sections, not non-lighted extension cables. Available in different configurations to meet your replacement and extension needs.

Available Model Options

• C5106: Designed exclusively for the APPECK C5106 PRO lighting system.

• C5111 / PL2 (C5121): Universal light strings compatible with both APPECK C5111 and PL2 permanent outdoor lighting systems.

• 12-Light String × 1
• 1-Light String × 12
• 6-Light String × 1

Before Ordering

Choose the housing color, model and light string configuration that match your existing lights.

• C5106 light strings are not interchangeable with C5111 or PL2 light strings.

• C5111 and PL2 use the same compatible light string.

• If you need non-lighted cable to bridge a gap, choose a compatible extension cable instead of an illuminated light string.

For the complete PL2 RGBCW system, visit APPECK PL2 RGBCW Permanent Outdoor Lights. For compatible splitters, amplifiers, cables and power parts, browse PL2 Accessories & Replacement Parts.

Warranty Support: For assistance with this accessory, contact APPECK Support with your order number and product model.

APPECK PL2 TS2 Signal Splitter

Two Independent Signal Branches for APPECK PL2 Permanent Outdoor Lights.

Expand your PL2 lighting setup with the TS2 Signal Splitter. It divides one signal connection into two independently controlled branches, giving you greater flexibility when planning your outdoor lighting layout.

Key Features

Two Independent Branches
Splits one signal connection into two separate branches for flexible lighting arrangements.

Independent Control
Allows two branches of APPECK Life-compatible PL2 lights to be controlled independently.

Flexible Installation
Provides more flexibility for different roofline layouts and outdoor lighting configurations.

Compatibility

• Designed for APPECK PL2 Permanent Outdoor Lights.

• Compatible with APPECK Life-compatible PL2 lighting systems.

• Requires compatible PL2 components and connections.

Important Notes

• TS2 is designed specifically for the PL2 system.

• Please confirm compatibility with your existing lighting setup before ordering.